(from the article `hand tool`) ...hammering while cold. This also hardens copper and allows it to carry a sharp edge, the hammered edge being capable of further improvement on an ... Other processes are performed below the recrystallization temperature. These are called cold working. Cold working hardens metal and makes the part ... ...
Found on
http://www.britannica.com/eb/a-z/c/108
the plastic deformation of a metal at a temperature below that at which it recrystallizes.
Found on
http://www.chemicalglossary.net/definition/322-Cold_Working
the plastic deformation of a metal at a temperature below that at which it recrystallizes.
Found on
http://www.encyclo.co.uk/local/20089
Deforming metal plastically under conditions of temperature and strain rote that induce strain hardening. Usually, hut not necessarily, conducted at room temperature. Contrast with hot working.
Found on
http://www.encyclo.co.uk/local/20742
Deforming metal plastically under conditions of temperature and strain rote that induce strain hardening. Usually, hut not necessarily, conducted at room temperature. Contrast with hot working
Found on
http://www.encyclo.co.uk/local/21115
Deforming a metal at a temperature below that of recrystallisation so that the metal hardens.
Found on
https://copperalliance.org.uk/about-copper/copper-glossary/
Deforming a metal at a temperature below that of recrystallisation so that the metal hardens.
Found on
https://oldcopper.org/special_topics/glossary.php
Plastic deformation, such as rolling, hammering, drawing, etc., at a temperature sufficiently low to create strain-hardening (work-hardening). Commonly, the term refers to such deformation at normal temperatures.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The plastic deformation of a metal at a temperature below that at which it re-crystallizes. Increasing the amount of cold work causes the dislocation density to rise in the material, making it more difficult to plastically deform the material and eventually cause brittle fracture. There are five methods:Cold rollingCold drawingCold drawing and grin...
Found on
https://www.encyclo.co.uk/local/20687
any type of strain hardening that increases hardness, ductility, strength and temper
Found on
https://www.encyclo.co.uk/local/21670
Rolling or drawing semi-finished steel products to provide higher physical properties or better surfaces than can be produced by hot-working.
Found on
https://www.encyclo.co.uk/local/22435
See work hardening.
Found on
https://www.jtcmetals.com/blog/metal-glossary/
Plastic deformation, such as rolling, hammering, drawing, etc., at a temperature sufficiently low to create strain-hardening
Found on
https://www.unifiedalloys.com/resources/glossary/
No exact match found.
